Usage of Violin Tuner

07-26-2024

Usage of Violin Tuner
1. Press the power button of the tuner to turn on the tuner. Press the M/T key to adjust to the G-file tuning mode, and G tunes the guitar.
2. Plug the tuner into the pickup (clip) and clip the chuck to the guitar head.
3. To start tuning, pluck the string 1, the smallest one, by hand, and watch the pointer on the LCD screen of the tuner to see if it is stable in the middle position. If not, please adjust the looseness and tightness of the string 1, pluck the string 1 again (other strings cannot be plucked), repeatedly adjust the looseness or tightness of the string 1, and bounce the string 1 to make the pointer point to the middle position, and keep it stable for 0.5 seconds. At this time, the screen should become.
4. Then tune the string 2. According to the method of step 3, make the pointer of the tuner point to the middle position and keep it stable for 0.5 seconds. At this time, the screen should turn green and the green indicator light will be on. When the arrow 2 shows 2B, it means that the tuning is in place and the tuning of the string 2 is completed.

5. Then tune the string 3. According to the method in step 3, make the pointer of the tuner point to the middle position and keep it stable for 0.5 seconds. At this time, the screen should turn green and the green indicator light will light up. When the arrow 2 shows 3G, it means that the tuning is in place and the tuning of the string 3 is completed.
6. Then tune the string 4. According to the method in step 3, make the pointer of the tuner point to the middle position and keep it stable for 0.5 seconds. At this time, the screen should turn green and the green indicator light will light up. When the arrow 2 shows 4D, it means that the tuning is in place and the tuning of the string 4 is completed.
7. Then tune the string 5. According to the method in step 3, make the pointer of the tuner point to the middle position and keep it stable for 0.3 seconds. At this time, the screen should turn green and the green indicator light will be on. When the arrow 2 shows 5A, it means that the tuning is in place and the tuning of the string 5 is completed. (as shown below)
8. Then tune the string 6 (the thickest one). According to the method of step 3, make the pointer of the tuner point to the middle position and keep it stable for 0.3 seconds. At this time, the screen should turn green and the green indicator light will be on. When the arrow 2 shows 6E, it means that the tuning is in place and the tuning of the string 6 is completed.