Some Little Knowledge to Pay Attention to When Learning the Violin

09-20-2024

Some Little Knowledge to Pay Attention to When Learning the Violin
1．It is difficult to rub rosin on a new violin bow. If crushed with crushed rosin, the bow hair will be scratched, and the bow hair will easily break in future use. After dissolving the rosin with a cotton swab dipped in alcohol, it can be applied to the bow hair.This method is simple and fast, does not hurt the bow hair, and does not lose rosin powder for a long time.
2．After the violin bow is used for a long time, the bow will be smoothed and the friction will decrease.At this time, you can use No. 600 water frosted paper to put it on the strings and gently pull the bow a few times, then repeatedly grind the bow hair horizontally, with light force, and then rub it with rosin.

3．The violin qinma is bent and deformed. It can be boiled in water for 5 to 10 minutes, then flattened with a heavy object, and it can be restored to its original state after drying.
4．Such as violin A.The volume of the E string is higher than that of G.The D string is too small, so the upper end of the sound column can be gradually thinned.
5．For Qinma, if the strings are embedded in the Qinma, you can dip a piece of kraft paper with 502 glue on the end of the qinma and cut off the excess.This method is used to take the qinma upside down, press it on kraft paper, and glue it while pressing.
6．The G string is hoarse, if the volume is loud enough, and A.The E string is still good. You can use 30 to 40 ml of clear fish glue to pour into the belly of the qin, dripping all over the back and side panels, and the glue can be dried.This method is effective for some G caused by slight degumming and flaky wood.The hoarseness of the D string has improved.